Horn Super Tweeter
Posted in Uncategorized on 06/22/2005 01:16 am by admin
Horn Super Tweeter
 |
 PIONEER CS 77A SUPER TWEETER HORN  US $9.99
|
Types of Car Stereo Speakers
For a proficient and good quality car audio systems, car stereo speakers play a vital role. They are exceptional in the sense that they are designed only for reproducing sound frequencies. The audio system of the car is judged by a number of specifications matching the core.
The first criterion that a buyer should consider is the frequency response. It should be higher and wider so that the function of capturing and reproducing the sound is performed in a much better way. In addition, a buyer should also consider the efficiency or sensitivity of the car stereo speakers, which decide how far the sound will travel.
Focusing on the maximum power RMS, that is, the maximum power, which the speaker can produce continuously, is important if the system is to be played continuously.
Going for a component speaker will make the listening more thrilling since it gives a complete range and quality of sound inside the car. The power of car stereo speakers should be efficient enough not to diminish the riding power of the car. Not only this, while shopping for various types of speaker systems it is always a good idea to listen to each type all of them should sound a bit different from the other.
With the advancement in technology and the demand of music lovers, today, one can find many types of car stereo speakers. The automakers have designed various kinds of stereo systems, which could reproduce certain frequencies. The wider the frequency response of a speaker the larger sound signal the speaker can capture and reproduce. This can be explained with an example. To capture and reproduce treble high pitched frequencies a tweeter is the best. A sub woofer can only capture the low frequency, i.e. the bass.
Today, in market one can find a wide range of car stereo speakers. These are Multi Element speakers a.k.a coaxial speakers, Midbass or Midrange speakers, Component speakers and Sub Woofers.
Multi Element or coaxial speakers consist of two types speakers i.e., woofers and tweeters that are constructed into one. The woofer, which is shaped as a large cone, generates low range frequencies, on the other hand, there are three tweeters in the form of three small cones that handle the higher pitched frequencies.
Midrange speakers are those systems that are designed to capture and reproduce the middle and sometimes some low bass frequencies. A midrange speaker is generally smaller than a woofer and can reproduce frequency range of approximately 300 to 5000 hertz. These types are fitted in the side or the door panels of the cars.
Component speakers can reproduce high pitched frequencies. These kinds of speakers contain tweeters and horn loaded compression drivers. If a tweeter comes above 25 kilo hertz then it is called a super tweeter.
Another of the car stereo speakers is the sub woofer, which is capable of reproducing the lowest frequencies. The sub woofers have the capability of reproducing sound of the highest quality without reducing too much audio signal off it.
About the Author
Victor Epand is an expert consultant for used DVDs, used movies, and used car stereos. You can find the best marketplace for used DVDs, used movies, and used car stereos at these sites for used DVDs, used movies, and frequency, car stereo speakers.
|
|
Pyramid TW105 3.75 in. 200 Watts Super Horn Tweeter $18.06 3.75 Square Super Horn Tweeter. Frequency Response: 420kHz. SPL 94dB 1W/1M. Low Distortion Light Weight Highly Reliable. 100 Watts RMS/200 Watts Peak Power. 48 Ohms Impedance. Typical Impedance Appears as .13uF Capacitor. Series Resistor is Recommended. Complete Pair in Gift Box |
|
|
SOUND AROUND ELECTRONICS TW105 3.75 150 Watts Super Horn Tweeter $18.06 3.75 Square Super Horn Tweeter Frequency Response: 420kHz SPL 94dB 1W/1M Low Distortion Light Weight Highly Reliable 75 Watts RMS/150 Watts Peak Power 48 Ohms Impedance Typical Impedance Appears as .13uF Capacitor Series Resistor is Recommended Complete Pair in Gift Box |
|
|
PylePro PDBT13 Super Bullet Horn Tweeter $30.62 3.75 Aluminum DieCast Bullet Horn. 1 Titanium Diaphragm. 20 oz. Magnet. 1 HighTemperature Voice Coil. 4 Ohm Impedance. 350 Watts Max. Frequency Repsonse: 3.5 kHz 23 kHz. SPL: 98dB (1W/1M) |
|
|
Pyle PDBT-18 Bullet Titanium Tweeter $13.99 150 W 2 2 kHz 2" 25 kHz 3.75" 300 W 3.75" Aluminum horn w/ Super bullet tweeter Magnet Structure: 20 oz 1'' High temperature kapton voice coil Diamond chrome cutting finish Ferro fluid enhanced voice coil Sensitivity: 99dB Diameter: 3.75" Mounting Depth: 2" PDBT-18 bullet titanium tweeter Mylar crossover capacitor Limited PDBT-18 PDBT-18 Bullet Titanium Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
PylePro PSN1165 4.35 in. Dispersion Horn Piezo Tweeter $20.58 4.35 Square Super Horn Tweeters. Frequency Response: 1.8kHz 30kHz. SPL: 93dB 1W/1M. Excellent Transient Response. Low Distortion. Typical Impedance Appears as .3 UF Capacitor. Light Weight Highly Reliable. 200 Watts RMS/400 Watts Peak. Complete Pair In Gift Box. Suited 48 Ohm Impedance Applications. A 30 Ohm Series Resistor is Recommended to Assure Stability of Extended Range Amplifiers Preclude Hazard of Amplifier BurnOut |
|
|
2 Pro Horn Tweeter Car Audio Speaker 3.25 300W $25.95 - New Pair Pyramid TW18Bk 3.25" 300 Watt Car Super Tweeters - 300 Watts Rated Power - 3.25'' Aluminum Bullet Horn w/1'' Super Tweeter - 20 oz. Magnet Structure - Ferro Fluid Enhanced - Frequency Response: 2k-25kHz - SPL: 96dB - 4/8 Ohms Impedance - Complete to Any Woofer Enclosure - Complete Pair w/Capacitor Crossover Network & Hardware Frequency Response: 2k-25kHz |
|
|
Pyramid / TITANIUM SUPER TWEETER / TW44 $23.17 Pyramid - TITANIUM SUPER TWEETER - TW44 |
|
|
SOUND AROUND/PYLE INDUSTRIES PSN1167 3.5 Dispersion Horn Piezo Tweeter $18.46 3.5 Square Piezo Ceramic Super Horn Tweeter Frequency Response: 3.5kHz 25kHz SPL: 93dB 1W/1M Excellent Transient Response Low Distortion Typical Impedance Appears as .12 UF Capacitor Light Weight amp; Highly Reliable 75 Watts RMS/150 Watts Peak Complete Pair in Gift Box Suited 48 Ohm Impedance Applications A 30 Ohm Series Resistor is Recommended to Assure Stability of Extended Range Amplifiers amp; Preclude Hazard of Amplifier BurnOut Overall Dimensions: 3.5 x 3.5 Cutout Dimensions: 2.75 x 2.75 Screw Holes: 2.8 |
|
|
Pyramid TW18 3.25 in. 300 Watt Aluminum DieCast Super Titanium Tweeter $32.63 3.25 Aluminum Bullet Horn w/1 Super Tweeter. 20 oz. Magnet Structure. 300 Watts Rated Power. Ferro Fluid Enhanced. Frequency Response: 2k25kHz. SPL: 96dB. 4/8 Ohms Impedance. Complete to Any Woofer Enclosure. Complete Pair w/Capacitor Crossover Network Hardware |
|
|
PYRAMID TW18 300 Watt Aluminum DieCast Super Titanium Tweeter $32.63 20 oz. magnet structure 300W rated power ferrofluid enhanced Freq Resp: 2 k25 kHz Sensitivity: 96 dB Imp: 4/8? Complete to any woofer enclosure Complete pair with capacitor crossover network hardware 3.25 aluminum bullet horn with 1 super tweeter |
|
|
Pyle PylePro PH391 Horn Tweeter $13.99 1 kHz 10" 102 dB 15 kHz 200 W 4" 8 Ohm Magnet Weight: 20 oz Voice Coil Size: 0984" PH391 Pyle Pyle Audio, Inc PylePro PylePro PH391 Horn Tweeter Tweeter www.pyleaudio.com |
|
|
Pyle PylePro PH44 Horn Tweeter $7.99 1 1 kHz 100 W 105 dB 18 kHz 200 W 4" 8 Ohm Voice Coil Size: 1" Magnet Weight: 15 oz PH44 Pyle Pyle Audio, Inc PylePro PylePro PH44 Horn Tweeter Tweeter www.pyleaudio.com |
|
|
Pyle PylePro PH25 Horn Tweeter $5.99 1 1 kHz 100 dB 120 W 15 kHz 3" 60 W 8 Ohm Magnet Weight: 15 oz Voice Coil: 0.984" PH25 Pyle Pyle Audio, Inc PylePro PylePro PH25 Horn Tweeter Tweeter www.pyleaudio.com |
|
|
Power Acoustik NX-6 Horn Tweeter $25.99 1.80 lb 18 kHz 2.50 kHz 3.20" 4" 8 Ohm Maximum Power: 200 Watts Cast Aluminum Frame Horn Loaded 1" Copper Clad Aluminum Voice Coil Ferro Fluid Cooled Voice Coil SPL: 104 dB NX-6 NX-6 Horn Tweeter Power Acoustik Power Acoustik Electronics Tweeter www.poweracoustik.com |
|
|
PylePro PAHT9 5 Way DJ Tweeter System $64.67 Four 2.5 Horn Piezo Tweeters. 7.5 x 6.125 Super Horn Midrange/Tweeter. Titanium Compression Driver 1 VC Loaded in Horn. Compression Tweeter Magnet Weight: 20 oz. HeavyDuty Carrying Strap for Easy Portability. Quick Connect Terminals. Built In Crossover Network 5KHz. Power Handling: 150 Watts RMS/300 Watts Peak. Frequency Response: 1kHz27kHz. Sensitivity (1w/1m): 94 dB. Impedance: 8 Ohms. Dimensions: 23.2 W x 13 H x 17.2 D. Weight: 30 lbs |
|
|
Pyle PAHT9 5 Way DJ Tweeter System $64.67 Four 2.5 Horn Piezo Tweeters. 7.5 x 6.125 Super Horn Midrange/Tweeter. Titanium Compression Driver 1 VC Loaded in Horn. Compression Tweeter Magnet Weight: 20 oz. HeavyDuty Carrying Strap for Easy Portability. Quick Connect Terminals. Built In Crossover Network 5KHz. Power Handling: 150 Watts RMS/300 Watts Peak. Frequency Response: 1kHz27kHz. Sensitivity (1w/1m): 94 dB. Impedance: 8 Ohms. Dimensions: 23.2 W x 13 H x 17.2 D. Weight: 30 lbs |
|
|
SOUND AROUND/PYLE INDUSTRIES PSN1165 4.35 Dispersion Horn Piezo Tweeter $20.58 4.35 Square Super Horn Tweeters Frequency Response: 1.8kHz 30kHz SPL: 93dB 1W/1M Excellent Transient Response Low Distortion Typical Impedance Appears as .3 UF Capacitor Light Weight amp; Highly Reliable 200 Watts RMS/400 Watts Peak Complete Pair In Gift Box Suited 48 Ohm Impedance Applications A 30 Ohm Series Resistor is Recommended to Assure Stability of Extended Range Amplifiers amp; Preclude Hazard of Amplifier BurnOut |
|
|
PylePro PAHT5 5Way DJ Tweeter System $153.89 Four 3.5 Horn Piezo Tweeters. 4 x 14 Super Horn Midrange/Tweeter. Quick Connect Terminals. Built In Crossover Network. Power Handling: 150 Watts RMS/300 Watts Peak. Frequency Response: 800Hz20kHz. Sensitivity (1w/1m): 91 dB. Impedance: 8 Ohms. Dimensions: 17.4 W x 10.2 H x 12 D. |
|
|
PylePro PAHT7 6Way DJ Tweeter System $147.14 Four 3.4 Horn Piezo Tweeters. Dual 4 x 7 Super Horn Midrange/Tweeter. Quick Connect Terminals. Built In Crossover Network. Power Handling: 200 Watts RMS/400 Watts Peak. Frequency Response: 800Hz20kHz. Sensitivity (1w/1m): 92 dB. Impedance: 8 Ohms. Dimensions: 17.4 W x 9.4 H x 12 D. |
|
|
Pyle Audio / Pyle PylePro PH391 Horn Tweeter / PH391 $26.71 Pyle Audio - Pyle PylePro PH391 Horn Tweeter - PH391 |
|
|
Selenium Super Tweeter 100 W ST300SLF $68.85 Supertweeter for outstanding detail amp; clarity in high frequencieswithout harshness. The ST300SLF. may be used individually in lower power systems or arrayed for increased coverage amp; SPL in higher power systems.The bulletshape horn design offers a longer throw 40 x 40 dispersion.The cast aluminum housing is stable amp; durable.The phenolic annular diaphragm is longlasting costeffectiveand more naturalsounding than metallic diaphragms.The use of hightemperature materials amp; adhesivesimproves power handling amp; produces exceptionally highacoustic output.A precisely engineered diaphragm structure andalignment mechanism for easy reliable cost effectiverepair in case of diaphragm failure. ST300SLF: Product without Selenium / Professionallogo on the face plate. Nominal impedance. 8 OHMS. Minimum impedance 8 500 Hz . 6.9 OHMSPower handling. Musical Program (w/ xover 5 000 Hz 12 dB/oct)1 . 50 W. Musical Program (w/ xover 8 000 Hz 12 dB/oct)1 . 100 W. Sensitivity (2.83V1m) averaged from 5 to 15 kHz. 108 dB SPL. Frequency response 6 dB. 3 500 to 20 000 Hz. Sound dispersion (H x V) . 40 x 40 degrees. Diaphragm material . Phenolic. Voice coil diameter . 46 (1.8) mm (in). Re . 6.1 W. Flux density . 1.70 T. 1. Musical Program= 2 x W RMS. WARNING: Must be connected w/an appropriate crossover. ADDITIONAL INFORMATION. Magnet material . Barium ferrite. Magnet weight . 440 (15) g (oz). Magnet diameter x depth. 102 x 14 (4.02 x 0.55) mm (in). Magnetic assembly weight . 1 280 (2.82) g (lb). Housing material . Aluminum. Housing finish . Black epoxy. Magnetic assembly steel finish. Zincplated. Voice coil material. Copper. Voice coil former material . Polyimide (Kapton). Voice coil winding length. 2.9 (9.5) m (ft). Voice coil winding depth. 2.2 (0.09) mm (in). Wire temperature coefficient of resistance (a25). 0.00356 1/C. Volume displaced by tweeter. 0.7 (0.025) l (ft3). Net weight. 1 700 (3.75) g (lb). Gross weight. 1 800 (3.97) g (lb). Carton dimensions (W x |
|
|
Pyle PDBT28 Super Tweeter $10.99 1 104 dB 150 W 2 kHz 20 kHz 3.12" 3.13" 300 W 8 Ohm Diamond Chrome Cutting Finish Die-Cast Aluminum Frame 1'' High Temperature Kapton Voice Coil 30 oz Magnet Structure PDBT28 Tweeter Mylar Crossover Capacitor Limited PDBT28 PDBT28 Super Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
Pyle Audio / PYLE SUPER TWEETER 1IN / PDBT-28 $23.78 Pyle Audio - PYLE SUPER TWEETER 1IN - PDBT-28 |
|
|
Pyle Audio / PYLE SUPER TWEETER / PDBT-37 $46.84 Pyle Audio - PYLE SUPER TWEETER - PDBT-37 |
|
|
Pyle Audio Pyle PylePro PDBT45 Super Tweeter $25.34 Pyle Audio Pyle PylePro PDBT45 Super Tweeter |
|
|
PYRAMID TW47 Super Tweeter $25.99 1 2 kHz 2" 25 kHz 3.12" 3.13" 600 W 8 Ohm Die Cast Aluminum Frame High Temperature Kapton Voice Coil 60 oz Magnet Structure Weight 2'' Mounting Depth TW47 SuperTweeter Mylar Crossover Capacitor PYRAMID Pyramid Car Audio, Inc TW47 TW47 Super Tweeter Tweeter www.pyramidcaraudio.com |
|
|
Pyramid PMBTW12 5.75 in. x 2.625 in. Horn Piezo Tweeter $17.69 Piezo Tweeter. 5.75 x 2.625 Horn. Packed Bulk 125 Per Carton |
|
|
Pyle Pyle Pro PDBT37 Super Tweeter $34.99 1 2 kHz 25 kHz 500 W 8 Ohm Pyle Pro PDBT37 Super Tweeter Crossover Capacitor Titanium Super Tweeter Die-Cast Aluminum Frame Sensitivity: 110dB Limited PDBT37 Pyle Pyle Audio, Inc Pyle Pro PDBT37 Super Tweeter PylePro Tweeter www.pyleaudio.com |
|
|
Pyle PylePro PDBT45 Super Tweeter $15.99 1 1.50 kHz 104 dB 15 oz 16 Ohm 20 kHz Maximum Power: 400 Watts Voice Coil: 1.75" Cloth PDBT45 Pyle Pyle Audio, Inc PylePro PDBT45 Super Tweeter Tweeter www.pyleaudio.com |
|
|
Pyle Pyle Pro PDBT35 Super Tweeter $33.99 1 2 kHz 2.25" 2.75" 22 kHz 500 W 8 Ohm Titanium Super Tweeter Die-Cast Aluminum Frame Sensitivity: 108dB Limited PDBT35 Pyle Pyle Audio, Inc Pyle Pro PDBT35 Super Tweeter PylePro Tweeter www.pyleaudio.com |
|
|
Pyle Audio Pyle PDBT28 Super Tweeter Tweeter - 150W (RMS) / 300W (PMPO) $20.1 Pyle Audio Pyle PDBT28 Super Tweeter Tweeter - 150W (RMS) / 300W (PMPO) |
|
|
PylePro PAHT8 8 Way DJ Tweeter System $54.2 Eight 3.4 Super Horn Tweeters. PVC Finish. Sensitivity (1w/1m): 97 dB. Power Handling: 150W RMS / 300W Peak. Frequency Response: 4K27K Hz. Impedance: 8 Ohms. Dimensions: 16.8 W x 9.2 H x 12 D. Weight:15 Lbs |
|
|
Pyle PDS-521 Screw-On Tweeter $23.99 1 18 kHz 300 W 500 Hz 600 W 8 Ohm Midrange/Tweeter compression horn driver Titanium diaphragm 2.02" Flat aluminum voice coil Magnet structure: 30 oz Sensitivity: 107dB @ 1W/1M Terminals 205 type Fits horns with 1 3/8'' x 18 TPI threads Limited PDS-521 PDS-521 Screw-On Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
Pyle PDS-342 Screw-On Tweeter $18.99 1 1 kHz 20 kHz 200 W 400 W 8 Ohm Midrange/Tweeter compression horn driver Titanium diaphragm 1.35" Flat aluminum voice coil Magnet structure: 20 oz Sensitivity: 104dB @ 1W/1M Terminals 205 type Fits horns with 1 3/8'' x 18 TPI threads Limited PDS-342 PDS-342 Screw-On Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
Pyle PDS-442 Screw-On Tweeter $21.99 1 kHz 100 W 20 kHz 250 W 8 Ohm Midrange/Tweeter compression horn driver Titanium diaphragm 1.75'' Flat aluminum voice coil Magnet structure : 30 oz Sensitivity: 105dB @ 1W/1M Terminals 250 Type Fits Horns with 1 3 /8'' x 18 TPI threads Limited PDS-442 PDS-442 Screw-On Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
Pyle PDS-541 Screw-On Tweeter $32.99 1 1.50 kHz 18 kHz 300 W 600 W 8 Ohm Midrange/Tweeter compression horn driver Titanium diaphragm 2" Flat aluminum voice coil Magnet structure: 60 oz Sensitivity: 102db Terminals 205 type Fits horns with 1 3/8'' x 18 TPI threads Limited PDS-541 PDS-541 Screw-On Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
Pyle PDS-772 Screw-On Tweeter $39.99 1 18 kHz 300 W 500 Hz 600 W 8 Ohm Midrange/Tweeter compression horn driver Titanium diaphragm 2.84" Flat aluminum voice coil Magnet structure: 50 oz Sensitivity: 107dB @ 1W/1M Terminals 205 type Fits horns with 1 3/8'' x 18 TPI threads Limited PDS-772 PDS-772 Screw-On Tweeter Pyle Pyle Audio, Inc Tweeter www.pyleaudio.com |
|
|
GLI Sound Systems ATB6x16 Tweeter Box with Horn $63.79 1 Horn. Black Carpet Finish. Red Black Plastic Terminal. Power Handling: 10100 Watts (P.M.P.O). Height: 81/4 . Width: 181/2 . Depth: 16 . |
|
|
PylePro PDBT37 1 in. Titanium Super Tweeter $49.58 1 Titanium Super Tweeter. Die Cast Aluminum Frame. 500 Watts Max. 48 Ohms Impedance. Frequency Response: 2kHz25kHz. Sensitivity: 110dB/w/m. Crossover Capacitor Included |